7075 T6 Punch aluminum plate is made by combining a large number of process steps with computer numerical control (CNC) to punch holes with different spacing on the metal plate, ranging in diameter from less than 1mm to about 500mm. The specification stipulates that the diameter of the hole cannot be smaller than the thickness of the plate. The holes can be arranged in a straight line or in a staggered manner; The cross-sectional shape of a hole can be circular, square, narrow strip, or other irregular forms.
7A09 T6 Punch aluminum plate is made by combining a large number of process steps with computer numerical control (CNC) to punch holes with different spacing on the metal plate, ranging in diameter from less than 1mm to about 500mm. The specification stipulates that the diameter of the hole cannot be smaller than the thickness of the plate. The holes can be arranged in a straight line or in a staggered manner; The cross-sectional shape of a hole can be circular, square, narrow strip, or other irregular forms.
7A04 T1 Punch aluminum plate is made by combining a large number of process steps with computer numerical control (CNC) to punch holes with different spacing on the metal plate, ranging in diameter from less than 1mm to about 500mm. The specification stipulates that the diameter of the hole cannot be smaller than the thickness of the plate. The holes can be arranged in a straight line or in a staggered manner; The cross-sectional shape of a hole can be circular, square, narrow strip, or other irregular forms.
6063 T6 Punch aluminum plate is the main alloy of 6063 alloy. It is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process. Although its strength cannot be compared with 2XXX series or 7XXX series, it has many characteristics of magnesium and silicon alloys, and has good processability. The characteristics of electroplating, good corrosion resistance, high toughness and no deformation after processing, compact material and easy polishing, easy coloring film, oxidation effect and other excellent characteristics. 6063 T6 Punch aluminum plate mainly contains 0.4-0.8 silicon, 0.7 iron, 0.15-0.4 copper, 0.15 manganese, 0.8-1.2 magnesium, 0.04-0.35 chromium, 0.25 zinc, and 0.15 titanium. The tensile strength of 6063 T6 Punch aluminum plate is 290Mpa, the yield strength is 240Mpa, the elongation is 10%, and the hardness is 95 HB.
6061 T6 Punch aluminum plate is made by combining a large number of process steps with computer numerical control (CNC) to punch holes with different spacing on the metal plate, ranging in diameter from less than 1mm to about 500mm. The specification stipulates that the diameter of the hole cannot be smaller than the thickness of the plate. The holes can be arranged in a straight line or in a staggered manner; The cross-sectional shape of a hole can be circular, square, narrow strip, or other irregular forms.
6A02 T6 Punch aluminum plate is made by combining a large number of process steps with computer numerical control (CNC) to punch holes with different spacing on the metal plate, ranging in diameter from less than 1mm to about 500mm. The specification stipulates that the diameter of the hole cannot be smaller than the thickness of the plate. The holes can be arranged in a straight line or in a staggered manner; The cross-sectional shape of a hole can be circular, square, narrow strip, or other irregular forms.
5754 H22 Punch aluminum plate is made by combining a large number of process steps with computer numerical control (CNC) to punch holes with different spacing on the metal plate, ranging in diameter from less than 1mm to about 500mm. The specification stipulates that the diameter of the hole cannot be smaller than the thickness of the plate. The holes can be arranged in a straight line or in a staggered manner; The cross-sectional shape of a hole can be circular, square, narrow strip, or other irregular forms.
5086 H32 Punch aluminum plate is made by combining a large number of process steps with computer numerical control (CNC) to punch holes with different spacing on the metal plate, ranging in diameter from less than 1mm to about 500mm. The specification stipulates that the diameter of the hole cannot be smaller than the thickness of the plate. The holes can be arranged in a straight line or in a staggered manner; The cross-sectional shape of a hole can be circular, square, narrow strip, or other irregular forms.
5083 H24 Punch aluminum plate is made by combining a large number of process steps with computer numerical control (CNC) to punch holes with different spacing on the metal plate, ranging in diameter from less than 1mm to about 500mm. The specification stipulates that the diameter of the hole cannot be smaller than the thickness of the plate. The holes can be arranged in a straight line or in a staggered manner; The cross-sectional shape of a hole can be circular, square, narrow strip, or other irregular forms.
5052 H18 Punch aluminum plate is made by combining a large number of process steps with computer numerical control (CNC) to punch holes with different spacing on the metal plate, ranging in diameter from less than 1mm to about 500mm. The specification stipulates that the diameter of the hole cannot be smaller than the thickness of the plate. The holes can be arranged in a straight line or in a staggered manner; The cross-sectional shape of a hole can be circular, square, narrow strip, or other irregular forms.
5052 H18 Punch aluminum plate is made by combining a large number of process steps with computer numerical control (CNC) to punch holes with different spacing on the metal plate, ranging in diameter from less than 1mm to about 500mm. The specification stipulates that the diameter of the hole cannot be smaller than the thickness of the plate. The holes can be arranged in a straight line or in a staggered manner; The cross-sectional shape of a hole can be circular, square, narrow strip, or other irregular forms.
5005 H16 Punch aluminum plate is made by combining a large number of process steps with computer numerical control (CNC) to punch holes with different spacing on the metal plate, ranging in diameter from less than 1mm to about 500mm. The specification stipulates that the diameter of the hole cannot be smaller than the thickness of the plate. The holes can be arranged in a straight line or in a staggered manner; The cross-sectional shape of a hole can be circular, square, narrow strip, or other irregular forms.
CONTACT US
PRODUCTS
Copyright © Jiangsu Ruihongjin Metal Material Co., Ltd.