7a04 H16 Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
2A12 T651 Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
7475-O Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
7475 T6 Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
7475 T651 Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
7a04 T651 Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
7a04-O Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
The main alloying elements in 6082 H16 Aluminum coil are magnesium and silicon, which have medium strength, good corrosion resistance, weldability, and good oxidation effect . In particular, it has no tendency to stress corrosion cracking , has excellent weldability, good corrosion resistance and cold workability, and is a promising alloy with a wide range of applications.
6082 T651 Aluminum coil belongs to the 6××× series (Al-Mg-Si) alloy aluminum plate. It is an aluminum alloy plate that can be heat-treated and strengthened. It has medium strength, good welding performance and corrosion resistance. 6082 T651 Aluminum coil contains 0.7 - 1.3 silicon, 0.5 iron, 0.1 copper, 0.4-1.0 manganese, 0.6-1.2 magnesium, 0.25 chromium, 0.2 zinc, 0.1 titanium, the balance aluminum. The tensile strength of 6082 T651 Aluminum coil is ≥205Mpa, the yield strength is ≥110Mpa, and the elongation is 14%. It is mainly used in transportation and structural engineering industries. Such as bridges, cranes, roof structures, transport aircraft, transport ships, etc.
6082 T6 Aluminum coil belongs to the 6××× series (Al-Mg-Si) alloy aluminum plate. It is an aluminum alloy plate that can be heat-treated and strengthened. It has medium strength, good welding performance and corrosion resistance. 6082 T6 Aluminum coil contains 0.7 - 1.3 silicon, 0.5 iron, 0.1 copper, 0.4-1.0 manganese, 0.6-1.2 magnesium, 0.25 chromium, 0.2 zinc, 0.1 titanium, the balance aluminum. The tensile strength of 6082 T6 Aluminum coil is ≥205Mpa, the yield strength is ≥110Mpa, and the elongation is 14%. It is mainly used in transportation and structural engineering industries. Such as bridges, cranes, roof structures, transport aircraft, transport ships, etc.
6063 T6 Aluminum coil is the main alloy of 6063 alloy. It is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process. Although its strength cannot be compared with 2XXX series or 7XXX series, it has many characteristics of magnesium and silicon alloys, and has good processability. The characteristics of electroplating, good corrosion resistance, high toughness and no deformation after processing, compact material and easy polishing, easy coloring film, oxidation effect and other excellent characteristics. 6063 T6 Aluminum coil mainly contains 0.4-0.8 silicon, 0.7 iron, 0.15-0.4 copper, 0.15 manganese, 0.8-1.2 magnesium, 0.04-0.35 chromium, 0.25 zinc, and 0.15 titanium. The tensile strength of 6063 T6 Aluminum coil is 290Mpa, the yield strength is 240Mpa, the elongation is 10%, and the hardness is 95 HB.
6063 H12 Aluminum coil is the main alloy of 6063 alloy. It is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process. Although its strength cannot be compared with 2XXX series or 7XXX series, it has many characteristics of magnesium and silicon alloys, and has good processability. The characteristics of electroplating, good corrosion resistance, high toughness and no deformation after processing, compact material and easy polishing, easy coloring film, oxidation effect and other excellent characteristics. 6063 H12 Aluminum coil mainly contains 0.4-0.8 silicon, 0.7 iron, 0.15-0.4 copper, 0.15 manganese, 0.8-1.2 magnesium, 0.04-0.35 chromium, 0.25 zinc, and 0.15 titanium. The tensile strength of 6063 H12 Aluminum coil is 290Mpa, the yield strength is 240Mpa, the elongation is 10%, and the hardness is 95 HB.
CONTACT US
PRODUCTS
Copyright © Jiangsu Ruihongjin Metal Material Co., Ltd.