7075 T4 aluminum capillary tube

7075 T4 aluminum capillary tube is called ultra-high-strength aluminum alloy, the yield strength of the alloy is close to the tensile strength, the yield ratio is high, and the specific strength is also high, but the plasticity and high-temperature strength are low, so it is suitable for use at room temperature and below 120°C For load-bearing structural parts, the alloy is easy to process, has good corrosion resistance and high toughness. This alloy is widely used in aviation and aerospace fields and has become one of the most important structural materials in this field. 7075 T4 aluminum capillary tube​​​​​​​​​​​​​​ is a cold-treated wrought alloy with high strength, far superior to mild steel. 7075 T4 aluminum capillary tube is one of the strongest alloys commercially available. General corrosion resistance, good mechanical properties and anodic reaction. Fine grains allow better deep drilling performance, enhanced tool wear resistance, and thread rolling is more different.

7A04 T4 aluminum capillary tube

7A04 T4 aluminum capillary tube is an Al-Zn-Mg-Cu super-high-strength aluminum alloy, also known as super-duralumin , which is a relatively mature, long-term and widely-used alloy among super-duralumin. High strength, good heat treatment strengthening effect, medium plasticity in annealed and new quenched states; different from duralumin , the corrosion resistance in the artificial aging state is better than that in the natural aging state, and the natural aging process is slow, it needs to go through 3 The peak of age hardening can only be reached after one month, so 7A04 T4 aluminum capillary tube is used in the state of quenching and artificial aging. The disadvantage is that the structure stability is not high, the low frequency fatigue strength is low, and there is a tendency of stress corrosion cracking. The alloy has good spot weldability , poor gas welding, good machinability after heat treatment, but poor machinability after annealing.

6082 T6 aluminum capillary tube

6082 T6 aluminum capillary tube belongs to the 6××× series (Al-Mg-Si) alloy aluminum plate. It is an aluminum alloy plate that can be heat-treated and strengthened. It has medium strength, good welding performance and corrosion resistance. 6082 T6 aluminum capillary tube contains 0.7 - 1.3 silicon, 0.5 iron, 0.1 copper, 0.4-1.0 manganese, 0.6-1.2 magnesium, 0.25 chromium, 0.2 zinc, 0.1 titanium, the balance aluminum. The tensile strength of 6082 T6 aluminum capillary tube is ≥205Mpa, the yield strength is ≥110Mpa, and the elongation is 14%. It is mainly used in transportation and structural engineering industries. Such as bridges, cranes, roof structures, transport aircraft, transport ships, etc.

6063 T6 aluminum capillary tube

6063 T6 aluminum capillary tube is the main alloy of 6063 alloy. It is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process. Although its strength cannot be compared with 2XXX series or 7XXX series, it has many characteristics of magnesium and silicon alloys, and has good processability. The characteristics of electroplating, good corrosion resistance, high toughness and no deformation after processing, compact material and easy polishing, easy coloring film, oxidation effect and other excellent characteristics. 6063 T6 aluminum capillary tube mainly contains 0.4-0.8 silicon, 0.7 iron, 0.15-0.4 copper, 0.15 manganese, 0.8-1.2 magnesium, 0.04-0.35 chromium, 0.25 zinc, and 0.15 titanium. The tensile strength of 6063 T6 aluminum capillary tube is 290Mpa, the yield strength is 240Mpa, the elongation is 10%, and the hardness is 95 HB.

6063 T4 aluminum capillary tube

6063 T4 aluminum capillary tube is the main alloy of 6063 alloy. It is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process. Although its strength cannot be compared with 2XXX series or 7XXX series, it has many characteristics of magnesium and silicon alloys, and has good processability. The characteristics of electroplating, good corrosion resistance, high toughness and no deformation after processing, compact material and easy polishing, easy coloring film, oxidation effect and other excellent characteristics. 6063 T4 aluminum capillary tube mainly contains 0.4-0.8 silicon, 0.7 iron, 0.15-0.4 copper, 0.15 manganese, 0.8-1.2 magnesium, 0.04-0.35 chromium, 0.25 zinc, and 0.15 titanium. The tensile strength of 6063 T4 aluminum capillary tube is 290Mpa, the yield strength is 240Mpa, the elongation is 10%, and the hardness is 95 HB.

6061 T6 aluminum capillary tube

The main alloying elements in 6061 T6 aluminum capillary tube are magnesium and silicon, which have medium strength, good corrosion resistance, weldability, and good oxidation effect . In particular, it has no tendency to stress corrosion cracking , has excellent weldability, good corrosion resistance and cold workability, and is a promising alloy with a wide range of applications.

5083 H18 aluminum capillary tube

5083 H18 aluminum capillary tube belongs to the Al-Mg-Si series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. The main alloying element of 5083 H18 aluminum capillary tube is magnesium, which has good formability, corrosion resistance, weldability, and medium strength. It is used to manufacture aircraft fuel tanks, oil pipes, and sheet metal parts for transportation vehicles and ships, instruments, street lamp brackets and rivets, Hardware products, electrical casings, etc.

5056 H18 aluminum capillary tube

5056 H18 aluminum capillary tube is an Al-Mg series anti-rust aluminum alloy, which cannot be strengthened by heat treatment. The chemical composition of the alloy is basically similar to that of 5B05 alloy except that the content of manganese is low, and the content of magnesium is slightly higher than that of 5A05 alloy. The properties of this alloy are basically similar to those of 5B05. The alloy has good plasticity in annealed state, good corrosion resistance and acceptable weldability.

5052 H12 aluminum capillary tube

The main alloying element of 5052 H12 aluminum capillary tube is magnesium, which has good formability, corrosion resistance, weldability, and medium strength. It is used to manufacture aircraft fuel tanks, oil pipes, and sheet metal parts of transportation vehicles and ships, instruments, street lamp brackets and rivets, Hardware products, electrical-apparatus shells, etc. ② AL-Mn series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, cannot be strengthened by heat treatment, and plasticity during semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets.

5005 H22 aluminum capillary tube

5005 H22 aluminum capillary tube is similar to 3003 alloy, with medium strength and good corrosion resistance. 5005 H22 aluminum capillary tube can be used as conductors, cooking utensils, instrument panels, architectural decorations, etc. The product version is flat, the surface is smooth and oil-free

5A06 H24 aluminum capillary tube

5A06 H24 aluminum capillary tube is Al-Mg series anti-rust aluminum, 5A06 H24 aluminum capillary tube has high strength and corrosion stability, good plasticity in annealed and extruded state, weld air tightness and weld seam welded by argon arc welding The plasticity is acceptable, the welded joint strength of gas welding and spot welding is 90-95% of the matrix strength, and the machinability is good.5A06 H24 aluminum capillary tube is a high-magnesium alloy with good strength, corrosion resistance and machinability among non-heat-treatable alloys. The surface is beautiful after anodizing. Arc welding performance is good. The main alloying element in 5A06 H24 aluminum capillary tube is magnesium, which has good corrosion resistance and weldability, as well as medium strength.5A06 H24 aluminum capillary tube belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength.

4007 H112 aluminum capillary tube

4007 Aluminum Coil Tube​​​​​​​​​​​​​​​​​​​​​ this is a 4000 series aluminum alloy. The main alloying addition is silicon.4007 Aluminum Coil Tube​​​​​​​​​​​​​​ is the Aluminum Association (AA) designation for this material. In European standards it will be given as EN AW-4007. Also, the EN chemical name is AlSi1,5Mn. The UNS number is A94007.