6063 H112 Aluminum coil is the main alloy of 6063 alloy. It is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process. Although its strength cannot be compared with 2XXX series or 7XXX series, it has many characteristics of magnesium and silicon alloys, and has good processability. The characteristics of electroplating, good corrosion resistance, high toughness and no deformation after processing, compact material and easy polishing, easy coloring film, oxidation effect and other excellent characteristics. 6063 H112 Aluminum coil mainly contains 0.4-0.8 silicon, 0.7 iron, 0.15-0.4 copper, 0.15 manganese, 0.8-1.2 magnesium, 0.04-0.35 chromium, 0.25 zinc, and 0.15 titanium. The tensile strength of 6063 H112 Aluminum coil is 290Mpa, the yield strength is 240Mpa, the elongation is 10%, and the hardness is 95 HB.
The main alloying elements in 6061 H112 Aluminum coil are magnesium and silicon, which have medium strength, good corrosion resistance, weldability, and good oxidation effect . In particular, it has no tendency to stress corrosion cracking , has excellent weldability, good corrosion resistance and cold workability, and is a promising alloy with a wide range of applications.
The main alloying elements in 6061 T651 Aluminum coil are magnesium and silicon, which have medium strength, good corrosion resistance, weldability, and good oxidation effect . In particular, it has no tendency to stress corrosion cracking , has excellent weldability, good corrosion resistance and cold workability, and is a promising alloy with a wide range of applications.
The main alloying elements in 6061 T6 Aluminum coil are magnesium and silicon, which have medium strength, good corrosion resistance, weldability, and good oxidation effect . In particular, it has no tendency to stress corrosion cracking , has excellent weldability, good corrosion resistance and cold workability, and is a promising alloy with a wide range of applications.
5754 H18 Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
5754 H111 Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
5754 H28 Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
5083 H12 Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
5083 H19 Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
5083 H26 Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
5056 H24 Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
5056 H18 Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
CONTACT US
PRODUCTS
Copyright © Jiangsu Ruihongjin Metal Material Co., Ltd.