1060 H28 Aluminum coil belongs to industrial pure aluminum , which has high plasticity, corrosion resistance, electrical conductivity and thermal conductivity , but its strength is low, heat treatment cannot be strengthened, and machinability is not good; it can be welded by gas welding, hydrogen atom welding and contact welding, and it is not easy to braze Welding; easy to withstand various pressure processing and extension, bending.
1060 H24 Aluminum coil belongs to industrial pure aluminum , which has high plasticity, corrosion resistance, electrical conductivity and thermal conductivity , but its strength is low, heat treatment cannot be strengthened, and machinability is not good; it can be welded by gas welding, hydrogen atom welding and contact welding, and it is not easy to braze Welding; easy to withstand various pressure processing and extension, bending.
1060 H26 Aluminum coil belongs to industrial pure aluminum , which has high plasticity, corrosion resistance, electrical conductivity and thermal conductivity , but its strength is low, heat treatment cannot be strengthened, and machinability is not good; it can be welded by gas welding, hydrogen atom welding and contact welding, and it is not easy to braze Welding; easy to withstand various pressure processing and extension, bending.
1050 H26 Aluminum coil has the general characteristics of aluminum, low density, good electrical and thermal conductivity, good corrosion resistance, good plastic processing performance, can be processed into plates, strips, foils and extruded products, etc., and can be used for gas welding and argon arc welding , spot welding. 1050 H26 Aluminum coil cannot be strengthened by heat treatment, but the strength can be improved by cold deformation. The only form of heat treatment is annealing. The recrystallization start temperature is related to the impurity content and deformation degree, generally around 200 °C. σb=80～100MPa, σ0.2=30～50MPa, ζ=35%～40%, HB=25～30 of the annealed plate. After 60%-80% cold deformation, although the chaos can be increased to 150-180MPa, the ζ value has dropped to 1%-1.5%. Increasing the content of iron and silicon impurities can increase the strength, but reduce the plasticity, conductivity and corrosion resistance.
1050 H14 Aluminum coil has the general characteristics of aluminum, low density, good electrical and thermal conductivity, good corrosion resistance, good plastic processing performance, can be processed into plates, strips, foils and extruded products, etc., and can be used for gas welding and argon arc welding , spot welding. 1050 H14 Aluminum coil cannot be strengthened by heat treatment, but the strength can be improved by cold deformation. The only form of heat treatment is annealing. The recrystallization start temperature is related to the impurity content and deformation degree, generally around 200 °C. σb=80～100MPa, σ0.2=30～50MPa, ζ=35%～40%, HB=25～30 of the annealed plate. After 60%-80% cold deformation, although the chaos can be increased to 150-180MPa, the ζ value has dropped to 1%-1.5%. Increasing the content of iron and silicon impurities can increase the strength, but reduce the plasticity, conductivity and corrosion resistance.
1050 H12 Aluminum coil has the general characteristics of aluminum, low density, good electrical and thermal conductivity, good corrosion resistance, good plastic processing performance, can be processed into plates, strips, foils and extruded products, etc., and can be used for gas welding and argon arc welding , spot welding. 1050 H12 Aluminum coil cannot be strengthened by heat treatment, but the strength can be improved by cold deformation. The only form of heat treatment is annealing. The recrystallization start temperature is related to the impurity content and deformation degree, generally around 200 °C. σb=80～100MPa, σ0.2=30～50MPa, ζ=35%～40%, HB=25～30 of the annealed plate. After 60%-80% cold deformation, although the chaos can be increased to 150-180MPa, the ζ value has dropped to 1%-1.5%. Increasing the content of iron and silicon impurities can increase the strength, but reduce the plasticity, conductivity and corrosion resistance.
CONTACT US
PRODUCTS
Copyright © Jiangsu Ruihongjin Metal Material Co., Ltd.